MG90 Micro Servo

Overview

The MG90 Micro Servo [Product Link] from TowerPro [Link] is an ideal servo motor for applications where SG90 Micro Servo [Link] is used, but a higher torque is needed.

Technical Specs

MG90 Micro Servo by TowerPro
MG90 Micro Servo by TowerPro
  • Metal Gears
  • Operating Voltage: 4.8-6V
  • Stall Torque: 2.2kg*cm(4.8V); 2.5kg*cm(6V)
  • Rotational Range: 180°
  • Analog Modulation
  • Operational Speed: 0.11sec/60°(4.8V); 0.10sec/60°(6V)
  • Pulse Width: 400-2400µs
  • Rotation: Dual Bearings
  • Temperature Range: 0°C-55°C
  • Weight: 14.0g
  • Dimensions (lxwxh): 23*12.2*29mm

Description

This servo motor can replace the SG90 Micro Servo [Product Link] in size and finds many applications in areas which require a 180 motion of light weight objects.

This motor can be highly useful in making small sized bipeds, humanoids, spiders (6- or 8- legged), robot hand, robot arm and other similar applications where higher torque may be needed.

// Code by Jasmeet Singh for http://Wiki.JMoon.co
#include <Servo.h>
Servo jservo;  // create servo object to control a servo
// a maximum of eight servo objects can be created

void setup()
{
jservo.attach(2);  // connects the servo on digital pin 2 to the servo object
}

void loop()
{
jservo.write(0);
delay(2000);
jservo.write(180);
delay(1000);
}

Possible Application Areas

Some applications using this product are:
1. Spider Robot [Link].
2. Humanoid Robot [Link].
3. Biped Robot [Link].

Did you create a project using this product? Leave details/links below!

Comments

So empty here ... leave a comment!

Leave a Reply

Your email address will not be published. Required fields are marked *

Sidebar